How to transport a piano in New York?

How to transport a piano in New York?

How to transport a piano in New York?
Transporting a piano can cause considerable difficulties. A heavy tool with a complex design requires careful handling. Its weight can reach 400 kg. The piano cannot be disassembled, turned over on one side, or pushed sharply. This can lead to damage to the mechanisms, loss of sound. In order not to spoil the tool during transportation, it is necessary to seek help from experienced movers, especially if there are narrow corridors and staircases on the way.
To make the move great, contact a trusted company site.
We are preparing the piano for transportation.
The tool must be prepared for transportation. It is necessary to determine the route of removal for loading into the car, open and prop up all the doors on the way. Several movers should be involved, at the rate of 1 person for every 45 kg of weight. All participants in the process must wear gloves with a silicone layer on the palms. To avoid various damages, the outer parts of the tool must be removed and packed. The work is as follows:
We remove the bottom cover, which protects the pedal mechanism and part of the soundboard. It can be attached to latches or screws.
It is better not to touch the impact mechanism. If there is an urgent need, it is necessary to unscrew the mounting bolts, carefully remove the keyboard and mechanics, and pack.
Disconnect the top cover from the housing. It is fastened with latches.
Unscrew the heavy cover to protect the keys.
The sound device requires special attention. The strings should be covered with thick paper. If the cover of the keys is not unscrewed, it is necessary to put foam rubber or a soft cloth under it.
If it is not possible to disconnect the dangling parts of the piano, it will have to be transported assembled. In this case, it is necessary to fix all the opening parts with adhesive tape. Loose covers of mechanisms can come off, pinch fingers when taking the tool out of the apartment.
The entire tool completely, its individual parts should be wrapped with corrugated paper or a special film with air bubbles. If it is not possible to find special materials, thick blankets or blankets will be suitable for protecting the tool. The fabric wrap should be fixed with a wide ribbon or rope.


londa

20 Blog posts

Comments